What is ATS? Short for Auto Tranfer Swich, automatic source inversion system.

 Talk about standby power systems, including permanent transmitters or UBS systems, to respond to power outages, or to power outages.

Depending on the power grid loss, ATS typically responds to a 15 second delay, which can be reversed through the backup power supply. Generally, the generator is operated in automatic operation when the safety conditions are met. Full of engine and power.

Therefore, to have a good and safe automatic source system, the user often chooses the well-known brands of Socomec or Osung, or Shnieder, branded products on the market.

 ATS consists of a cabinet and is divided into two different sources: (1). The ATS control system includes: ATS control panel consisting of: Socomec, Datakom, Dolphin … etc .. and connected to the machine running system. If the control panel is ATS or Remos Start, the user is connected between the cabinet system. (2) The dynamic switching system, switchgear, Socomec, Contactor, or ACB depending on the load that the user selects the device to ensure the safest.

Switching mode and ATS control limits: ATS must first ensure that the parameters used by the installer are in a safe state at the end of the load source such as: 200 VAC to 245 VAC, if the voltage in one of the three phases is below the safe level, if the voltage is above or below this threshold, ATS will automatically switch back to power or vice versa.

Excessive load: ATS is specified with the rated current of the equipment and ensures short circuit and over-current requirements are exceeded.

 The ATS system is generally safe, so it is used mostly in schools, hotels, resorts, industrial parks, banks, or small transaction offices that need to meet the demand for electricity.

We are the leading provider of this product and have 20 years of experience operating the system and we have been monitoring the whole product over the past 20 years.

Please call us, so that we provide the best products for customers.